Station Antennas
from Falcon Direct

   

Antennas, line kits and accessories for base stations

Falcon Direct offers a variety of antennas, line kits, and accessories for base stations and repeaters.  On-site stations such as the Ritron Patriot of Liberty repeater often need nothing more that the flex antenna supplied.  For longer range, any of the antennas can be used although the last two models in the list below are normally used only with 50 or 100 watt full power stations.

We offer two basic types of transmission cable as well as a variety of accessories to protect your base station abnormal electrical damage.  Licensing and tower installation can be arranged if desired.  If you don't see the desired antenna below, click here for additional base station models from Sinclair or here for antennas by Childs Antenna.  For your general information, we have provided pricing on post sales service plans on all models of base stations and repeaters.  When you deal with Falcon Direct, you get a TOTAL solution!

 

Packaged antenna and cable kits

A 3 dB VHF mobile type antenna with magnet mount and 17 feet of cable (increases transmit and receive capability by a factor of 2X).  Normal range to a handheld or pager in most conditions is up to 1 miles.  This antenna is approximately 30" in height and weighs just a few pounds with cable and connectors.  Part Number AT101. 
Price - $50.

A 5 dB UHF mobile type antenna with magnet mount and 17 feet of cable (increases transmit and receive capability by a factor of 4X).  Normal range to a handheld or pager in most conditions is up to 2 miles.  This antenna is approximately 30" in height and weighs just a few pounds with cable and connectors.  Part  Number AT102 Price - $50.

A 3 dB VHF base station type antenna for mounting on a 1-1/2" pipe (not supplied) and 75 feet of low loss cable (increases transmit and receive capability by a factor of 2X over the mobile type antenna).  Normal range to a handheld or pager in most conditions is up to 3 miles.  This antenna is approximately 8 feet  in height and weighs approximately 10 pounds with cable and connectors.  Part Number AT103 Price - $250.

A 5 dB UHF base station type antenna for mounting on a 1-1/2" pipe (not supplied) and 75 feet of low loss cable (increases transmit and receive capability by a factor of 2X over the mobile type antenna).  Normal range to a handheld or pager in most conditions is up to 4 miles. This antenna is approximately 8 feet  in height and weighs approximately 10 pounds with cable and connectors. Part Number AT104  Price - $250. 

A 5.2 dB VHF base station type antenna for mounting on a 1-1/2" pipe (not supplied) and 75 feet of low loss cable (increases transmit and receive capability by a factor of 4X over the mobile type antenna).  Normal range to a handheld or pager in most conditions is up to 7 miles.  This antenna is approximately 20 feet  in height and weighs approximately 100 pounds with cable and connectors.  Part Number AT105 Price - $995.

    

A 10 dB UHF base station type antenna for mounting on a 1-1/2" pipe (not supplied) and 75 feet of low loss cable (increases transmit and receive capability by a factor of 10X over the mobile type antenna).  Normal range to a handheld or pager in most conditions is up to10 miles.  This antenna is approximately 20 feet  in height and weighs approximately 100 pounds with cable and connectors.  Part Number AT106  Price - $995.

    

Want to know more about the personal radios that go with these stations?  Click here!

The above calculations assume an antenna mounting height of 15 feet at the antenna base.  Greater range is possible by installing the antenna at an area of high elevation over average terrain and/or erecting a tower (this can get expensive).  If you would like a quote on a tower, just give us a call at 1-800-489-2611.

A word about licensing

All fixed stations must be licensed - period, no exceptions, ever, for anybody except one.  The MURS (Multi Use Radio Service) is available for anyone to use - business, personal or public safety.  Five frequencies are available in the VHF 150 - 154 MHz band for fixed station, mobile, handheld or paging use.  Additional information is available by calling Josie Lynch at 301.309.2380.

External Antenna and cable Systems

For those who want to choose a specific antenna package with the option of selecting the antenna, cable and accessories separately, choose from the price guide below.

Base antennas & cable Item Description Price
Antenex Model FG1523

Antenex model FG1523 fiberglass omni directional VHF base station antenna.150-174 MHz 3db gain  (5 dB UHF) Gold Fiberglass Base Station antennas are collinear designs enclosed in a high density fiberglass, which is covered with a protective ultraviolet inhibiting coating. Mounting bracket set model FM2 included.  Oversize UPS shipping charges will apply. Part number AT107.

$209
Decibel Model DB-224

Decibel Products DB-224 is a 5.25 db exposed dipole base station antenna used for maximum range.  A UHF model is also available at the same price with a 10.0 omni-directional gain.   Mounting bracket for standard 2" pipe included. Oversize shipping charges will apply. Shipping weight approximately 50 lbs.  Shipping by Motor carrier only. Part Number AT108.

$749
 

 

 

Cable Kits

RG213

Heliax 1/2"

We offer two cable kits.  For lengths of up to 100', we offer low loss RG213 with dual Type N connectors at a cost of $1.50 per foot.  For lengths over 100', we recommend the ultra low loss 1/2" Heliax cable at a cost of $3.00 per foot plus $50 for connectors (Type N normally provided although other connectors can be supplied on request. Part number AT109.

RG213 - 100' w/connectors @ $150

Heliax -  100' w/connectors @ $350

Note:  Other accessories may be required for installation.  If the antenna is to be mounted on an existing tower, a side mount bracket may be required.  The Antenex antenna can be installed on a CB/TV type mast since it weighs only 3 lbs and is approximately 6' in height.  The DB-224 is approximately 20' high and weighs approximately 40 lbs.  This antenna is designed for mounting on a commercial grade tower such as the Rohn #25G. If you have any questions, please send us an email at sales@falcondirect.com or call (205) 854-2611.

Base Station Accessories

Base station accessories Item Description Price
Polyphaser

The Polyphaser provides lightning protection on the transmission cable. Direct lightning strike damage caused by entry through the antenna feed line is greatly reduced by adding this device. Part number AT110.

$69
UPS Surge Protection

Our new SyCom surge protector provides protection for both AC outlets and phone lines plus UPS battery back-up for critical application equipment such as PC's telephone switches, or anything else you need protected for sags, spikes, surges, and even lightning!  Part number AT111.

$99
Paging Encoder

The P1000 paging encoder can be connected to any of our base station to provide the ability to selectively call up to 999 individual pagers, with or without group call. Custom installation cable for selected radio is included. Part number AT112/

$349

Post Sale Service Plans

Customer is responsible for return to ICOM, Midland, Ritron, TEKK, or other manufacturer as applicable during warranty term  (Motorola pays shipping both ways).  If you wish, defective radio(s) can be dropped off to Falcon Direct who ships to the applicable manufacturer and returns to customer ($35 charge).  Falcon can also provide a loaner radio (model may be different than customer radio). Next Day Exchange (N.D.E.) provides a replacement radio  (same model type) within 24 hours.  Falcon sends UPS call tag to pick up defective unit and pays for all shipping.    After the warranty period, there is a choice of time and materials shop service, flat rate repair, or annual contract plans.  See chart below for applicable charges.  Prices include standard ground shipping via UPS.

Model Customer return within warranty period Return to Falcon for return to factory (Shop charge) Return to Falcon with request for loaner radio Next Day Exchange Service    (Annual fee) Flat Rate Repair (Non-Warranty) Time and material hourly rate (Non-warranty)
Stations under 10W 1-way shipping $35 $75 $29 $79 $80
Stations up to 50W 1-way shipping $85 $275 $275 $275 $80
Stations over 50W 1-way shipping $125 Not available Not available Not available* $80
Digital Stations 1-way shipping $125 Not available Not available Not available* $80

* Note:  Flat rate repair service is not available on Base/Repeaters over 50 watts.  Repair cost on a time and material basis would be calculated at $80 per hour plus parts and shipping.  Add $.80 per mile one way from our shop to your location if on-site service is desired.  Damage caused by lightning, floods, or misuse is not covered under either warranty or Next Day Exchange plans.

Thanks for visiting with us.  If we can be of service in any way, please call us locally at 205.854.2611 or nationwide toll free at 1.800.489.2611.  If you prefer, email sales@falcondirect.com, or fax 205.853.6178.  Better yet, come see us!

User information.  Products sold by Falcon Direct are warranted to be technically compliant with the manufacturers specifications.  No other warranty relative to use of the equipment or related service, when applicable, is expressed or implied.  Falcon Direct makes no claim for suitability or fitness of users purpose or application.  Falcon Direct is not responsible for claims arising from the use of equipment or services provided by or through Falcon Direct in which there are losses attributed to the use or application of equipment and/or related services.  User agrees to these terms as a condition of purchase.

 

 

Copyright 2009 - Falcon Direct, Inc.  
This page was last updated on 05/31/2009